Heavy-duty truck & trailer parts · Ships from Colorado

October 2026 Raw Material Overview

Market update · October 2026
By TAG Fleet Parts · Updated · 5 min read

What is happening to steel, rubber, metals and fuel this fall, which Class 7 and 8 truck and trailer parts feel it first, and how to plan your parts budget for the months ahead.

U.S. hot-rolled steel$1,255 / short ton+52% vs. a year ago · highest since May 2022
Natural rubber (SGX)≈ 250 ¢ / kgHighest level since early 2013 (late Sept)
U.S. diesel, retail$6.53 / galRecord high, week of Sept 21 (EIA)
Brent crude oil$114 / bblSeptember 2026 average (EIA)
Copper (LME)≈ $14,400 / tMid-October · near record levels
Aluminum (LME)≈ $3,000 / tMid-October · eased from mid-year highs

Benchmark levels as published by the sources below, mid-October 2026 unless noted. Benchmarks are market reference prices, not part prices.

Key takeaways
  • Parts costs are being pushed up by tight commodity markets, U.S. metal tariffs and record diesel at the same time.
  • Steel-heavy parts (drums, wheels, springs, fifth wheels) and rubber-heavy parts (air springs, tires, bushings) are the most affected.
  • Material increases typically reach parts invoices over the following weeks to months, so today’s markets preview next quarter’s prices.
  • The EIA expects oil to ease in 2027. Steel and rubber are likely to stay firm longer.
  • Plan replacements that are already due, and never defer safety parts to chase a forecast.

What is happening

1. U.S. steel is at a four-year high

Hot-rolled coil, the benchmark for most truck and trailer steel, reached $1,255 per short ton in mid-October, up 52% from a year earlier and the highest level since May 2022. A year ago, spot prices sat between $825 and $865. Nucor, the largest U.S. producer, has raised its published spot price nearly every week since early September, from $1,190 to $1,255, with mill lead times of three to five weeks.

2. Natural rubber is at a 13-year high

Rubber futures climbed to about 250 U.S. cents per kilogram in late September, the highest level since early 2013, on tight supply and weather disruptions in the main producing countries of Southeast Asia. High oil prices make synthetic rubber more expensive too, so manufacturers have little room to switch compounds to save cost.

3. Diesel set a record and crude stays high

The U.S. Energy Information Administration (EIA) recorded an all-time high national average diesel price of $6.53 per gallon in the week of September 21. Brent crude averaged $114 per barrel in September. The EIA points to tight global distillate supply and disrupted Middle East exports. Diesel affects parts prices twice: in the cost of making them and in freight on every shipment.

4. Tariffs now apply to the full value of imported metal goods

A presidential proclamation of April 2, 2026, effective April 6, changed how Section 232 duties are charged on steel, aluminum and copper. Duties now apply to the full customs value of covered goods, not only their metal content: 50% on articles made entirely or almost entirely of these metals, and 25% on many derivative products. Reduced rates apply to some equipment through December 31, 2027, and to goods made with U.S.-produced metal. For buyers, imported finished parts and assemblies carry the duty on their whole value.

5. Copper is tight, aluminum has eased

LME copper traded around $14,400 per tonne in mid-October, close to record territory. Aluminum has moved the other way, down to about $3,000 per tonne from roughly $3,400 in June, although U.S. buyers still pay regional delivery premiums and tariffs on top of the exchange price.

What it means for your parts

Heavy, simple parts made mostly of one material move first and most. Complex assemblies with electronics and machining move later and by less, because raw material is a smaller share of their cost.

Product familyMain cost driversSensitivityWhat to expect
Air springs (air bags)Natural and synthetic rubber, steel pistons and hardware, fabric cordHighRubber at a 13-year high plus costlier steel hardware. Price adjustments tend to come in steps rather than gradually.
Brake drums and rotorsCast iron and steel, energy for castingHighHeavy, material-dense parts. Among the first to reflect steel increases.
Brake pads and shoesSteel backing plates, friction materials, resinsMediumFollows steel and resin costs, usually more moderately than drums.
Steel wheelsHot-rolled and rim steelHighTracks the steel benchmark closely.
Aluminum wheelsAluminum, U.S. delivery premium, energyMedium-HighStill elevated, but aluminum is the input with the most room to ease.
Leaf springs and suspensionSpring steel, structural steelHighDirect exposure to the steel increase.
Fifth wheels, landing gear, hitchesCast and structural steel, machiningHighSteel costs plus full-value tariffs on imported units.
TiresNatural and synthetic rubber, carbon black, steel cordVery highNearly every input is elevated at the same time.
Electrical: harnesses, alternators, starters, lightingCopper, resin housings, electronicsMedium-HighWatch availability and lead times as much as price.
Bushings, mounts, hoses, seals, diaphragmsRubber compounds, steel insertsHighSmall parts with a high rubber share. Percentage increases can exceed those on larger parts.
Mudflaps, fenders, composite panelsPlastic resins (oil-based), rubberMediumFirst in line to benefit if oil prices ease in 2027.

Sensitivity reflects how much of each part family’s cost comes from the inputs that rose most this year. It is a guide to where price changes are most likely, not a price for any specific part number.

Timing and quick math

Parts prices rarely change the same day a commodity does. Mills and compounders update their price lists first, manufacturers then work through material they bought earlier, and distributors publish new price files after that. A material increase typically reaches parts invoices over the following weeks to months. Increases also travel faster than decreases: surcharges can be added quickly, while reductions wait for higher-cost inventory to clear.

What steel adds per part

Steel weight in the partMaterial cost per $100 / short ton moveChange over the past year (+$390 to $430 / short ton)
50 lb$2.50$9.75 to $10.75
100 lb$5.00$19.50 to $21.50
200 lb$10.00$39 to $43
1 short ton (2,000 lb)$100$390 to $430

Raw steel cost only, before forming, casting, machining, freight or tariffs on imported parts. Compares $1,255 per short ton in mid-October 2026 with $825 to $865 a year earlier.

Example: a dry-van trailer that uses about 3.5 short tons of purchased steel carries roughly $1,370 to $1,500 more in steel cost than it did a year ago, before any other material, freight or tariff effect.

Outlook for 2027

The EIA’s October 2026 Short-Term Energy Outlook expects Brent crude to average $105 per barrel in the fourth quarter, then ease to $84 in 2027 as Middle East exports gradually recover. Fuel, freight and oil-based materials such as resins and synthetic rubber should be the first costs to soften.

Bar chart of Brent crude oil: $114 September 2026 average, EIA forecasts of $105 for Q4 2026, $96 for full-year 2026 and $84 for 2027
Brent crude oil, $ per barrel. Source: U.S. Energy Information Administration, Short-Term Energy Outlook, October 6, 2026.

Steel and rubber are likely to stay firm longer. U.S. steel prices are supported by tariffs that do not depend on world prices, and the reduced transitional tariff rates run through December 31, 2027. Natural rubber supply cannot respond quickly because new trees take years to reach production.

Practical steps for your fleet

  • Plan replacements that are already due. If drums, springs, air springs or tires are coming due this winter, ordering on your normal schedule usually beats waiting for a price drop.
  • Never defer safety parts to chase a forecast. Any future easing is likely to be smaller than the cost of a single roadside failure or out-of-service event.
  • Ask for the validity date on every quote and confirm pricing in writing when you accept it.
  • Check the trend monthly, not daily. Commodity prices move every week; parts prices respond over quarters.

Frequently asked questions

Why are heavy-duty truck parts getting more expensive in 2026?

U.S. hot-rolled steel is up 52% year over year, natural rubber is at its highest level since 2013, diesel set a record in September, and Section 232 tariffs now apply to the full value of imported steel, aluminum and copper goods.

Which truck parts are most affected by rising raw material costs?

Steel-heavy parts such as brake drums, steel wheels, leaf springs and fifth wheels, and rubber-heavy parts such as air springs, tires, bushings and hoses.

Will truck parts prices go down in 2027?

The EIA expects Brent crude to ease from $105 per barrel in Q4 2026 to $84 in 2027, so fuel- and oil-linked costs should soften first. Steel and rubber are likely to stay firm longer.

Download the October 2026 update (PDF, 6 pages)
Raw Material Costs and Your Truck Parts. Planning a large order? Email sales@tagfleetparts.com.
Download PDF

Market information only, not a quote, a price commitment or financial advice. The price of any part also depends on its specification, freight, tariffs and supplier terms. Market prices change daily; figures are as published by the sources above as of mid-October 2026.